|
|
Inside part of bottom broken away.
Broad rim, with leaf pattern.
Small, deep discus, rather oval depression pointed at air hole.
Handle solid, double grooved above, triple below; impressed circles at base ... 20 February 1932 ... Small, deep discus, rather oval depression pointed at air hole.
Handle solid, double grooved above, triple below; impressed circles at base.
On nozzle, groove from large wick hole to air hole, crossed by transverse grooves. |
| Foot and mouth missing. Large air hole in shoulder.
Graffito on shoulder:
Brown micaceous clay. Well, container 8. 3rd. c. A.D. Leica PD 1130-38(Ha 30), DA 15171 ... 20 May 1947 ... Foot and mouth missing. Large air hole in shoulder.
|
Boat-shaped, with air hole at base of nozzle.
Handle ungrooved. Palm branch underneatrh.
Unglazed.
Coarse red clay.
Type XXVIII (very late) of Corinth collection. In late Roman and later fill. Leica ... 26 March 1936 ... Boat-shaped, with air hole at base of nozzle.
|
Rim has stamped herringbone pattern, discus has forepart of a large fish right.
Air hole between rim and discus.
Unglazed.
Light red clay.
Type XXVIII of Corinth collection. Below modern road level. Leica ... 12 February 1936 ... Rim has stamped herringbone pattern, discus has forepart of a large fish right.
Air hole between rim and discus.
|
Most of handle broken away.
On rim, herringbone.
Discus plain, rather deep; with small central filling hole.
Nozzle set off by double grooves, air hole behind fairly large wick hole.
Handle, double grooved ... 1 March 1932 ... Discus plain, rather deep; with small central filling hole.
Nozzle set off by double grooves, air hole behind fairly large wick hole.
|
On rim, herringbone.
Discus plain, with more or less central filling hole.
Nozzle, set off by double grooves. Rounded. Air hole behind wick hole.
Handle solid; double grooved; set off from body by grooves ... 1 March 1932 ... Discus plain, with more or less central filling hole.
Nozzle, set off by double grooves. Rounded. Air hole behind wick hole.
|
Part of top preserved.
Rim has very large stamped circles; another circle stamped for air hole at base of nozzle, but not pierced. Discus has concentric fasciae; filling hole at left of center.
Unglazed ... 4 March 1936 ... Rim has very large stamped circles; another circle stamped for air hole at base of nozzle, but not pierced. Discus has concentric fasciae; filling hole at left of center.
|
Nozzle missing.
Herringbone pattern on rim, rosette on discus; air hole at base of neck.
Grooved handle; circular base line, within which "K Y" (?).
Red glaze.
Red clay.
Type XXVIII of Corinth collection ... 28 February 1936 ... Herringbone pattern on rim, rosette on discus; air hole at base of neck.
|
On rim, herringbone.
Discus small, concave, with central filling hole.
Handle solid; double grooved.
Nozzle, plain, with air hole at edge of discus, close to filling hole.
On bottom, double concentric ... 28 April 1932 ... Discus small, concave, with central filling hole.
Handle solid; double grooved.
Nozzle, plain, with air hole at edge of discus, close to filling hole.
|
Top only preserved.
Herringbone pattern on rim; rosette on discus. Vertical grooved handle, unpierced; air hole at base of neck.
Unglazed.
Red clay.
Type XXVIII of Corinth collection. Below modern road ... 13 February 1936 ... Vertical grooved handle, unpierced; air hole at base of neck.
|
Discus only preserved.
On rim, herringbone.
Discus, plain, surrounded by raised band, raised line around central filling hole; air hole in throat. Handle grooved, triply above, doubly below.
Nozzle set ... 16 July 1931 ... Discus, plain, surrounded by raised band, raised line around central filling hole; air hole in throat. |
| Complete; large air hole in shoulder. Foot hollow underneath; body full and "shouldery"; lip projecting.
Clay light brownish, micaceous. Dull red to dark glaze on upper half. Well, container 29, 5th ... 5 April 1937 ... Complete; large air hole in shoulder. |
Intact except for chips from nozzle.
Herringbone rim with plain panels; on discus, an animal, left; in the air above him a human figure (?) apparently floating.
Filling hole slightly off center. Large ... 17 April 1936 ... Herringbone rim with plain panels; on discus, an animal, left; in the air above him a human figure (?) ... Filling hole slightly off center. Large air hole at bottom of discus. |
Intact.
Curved wavy lines on rim. Whirling rosette on discus. Filling hole in center; air hole on neck. Solid handle with two grooves above and below. Almond-shaped revese with double-grooved lines enclosing ... 9 April 1936 ... Filling hole in center; air hole on neck. |
On rim, large irregullar circles and polugons, with raised edges.
On discus, irregular raised lines, with central filling hole.
Handle small, solid, ungrooved.
Nozzle plain, rounded; air hole at edge of ... 20 April 1932 ... On discus, irregular raised lines, with central filling hole.
Handle small, solid, ungrooved.
Nozzle plain, rounded; air hole at edge of discus.
|
On rim, herringbone.
Plain discus, with filling hole and air hole.
Nozzle, rounded, set off by grooves.
Handle solid, double grooved; set off from body by grooves, with circles at base.
On bottom, cross ... 11 February 1932 ... Plain discus, with filling hole and air hole.
|
On rim, wavy lines.
Discus, plain, almond-shaped, with small central filling hole and rather large air hole. Nozzle plain.
Handle solid, double grooved.
On bottom, double almond-shaped groove, enclosing ... 16 February 1932 ... Discus, plain, almond-shaped, with small central filling hole and rather large air hole. |
Rim missing; air hole in side. Body tapers to very small concave bottom with knob in center.
Dipinto in black beside handle:
Orange-buff clay. Outside smeared with red paint.
ADDENDA Sparta series ... 4 June 1938 ... Rim missing; air hole in side. |
Part of nozzle and front missing.
Grooved handle, pierced. Beads on rim; crescent on discus; air hole at base of nozzle. Grooves and ridges on reverse.
Unglazed.
Pinkish-buff clay.
Type XXVII variant ... 9 May 1936 ... Beads on rim; crescent on discus; air hole at base of nozzle. |
About half preserved.
Plain rim; discus has rosette with pointed petals. Air hole at edge of discus.
Thin purple-red glaze.
Light red clay.
Type XXVIII of Corinth collection. Below surface, with coins ... 27 February 1936 ... Plain rim; discus has rosette with pointed petals. Air hole at edge of discus.
|
| Mouth and most of neck missing. Air hole knocked in upper part of body. Body rather full, tapering sharply above and below.
Light brown micaceous clay. Unglazed. Well, container 28, 5th. c. A.D. 907-908 ... 5 April 1937 ... Mouth and most of neck missing. Air hole knocked in upper part of body. |
Part of discus preserved.
Concentric grooves on inner edge of rim. Two fishes on discus, left, their mouths joined by a U-shaped loop. Filling hole below fish, and air hole.
Worn red-brown wash.
Buff clay ... 15 April 1936 ... Filling hole below fish, and air hole.
|
Intact. Worn mould.
Square discus with rosette. In rectangular panels on rim, at either side, herringbone pattern. Grooves either side of air hole. Solid handle with horizontal grooves. Almond-shaped reverse ... 9 June 1936 ... Grooves either side of air hole. Solid handle with horizontal grooves. |
Intact save for chips.
Large stamped circles and small dots on the rim; plain discus, with central filling hole and three other holes. Large air hole on neck. Solid knob handle, unpierced.
Circular reverse; ... 9 April 1936 ... Large stamped circles and small dots on the rim; plain discus, with central filling hole and three other holes. Large air hole on neck. |
Rim, plain, except for a few grooves near handle and nozzle.
Discus, plain, pear-shaped, with central filling hole and air hole in channel to neck.
Handle double grooved. Nozzle, rounded, elongated.
On ... 13 July 1931 ... Discus, plain, pear-shaped, with central filling hole and air hole in channel to neck.
|
Vine pattern on rim.
Discus concave, with fine rays; ring round filling hole. Air hole at edge of discus.
Handle pierced, triple grooved.
Nozzle plain, raised.
On reverse, within a circular groove, beneath ... 8 June 1932 ... Discus concave, with fine rays; ring round filling hole. Air hole at edge of discus.
|
Broad rim, irregullar, with branch pattern.
Small, oval discus, with central filling hole; plain, concave.
Handle small, solid; ridged down the center; no lower part indicated.
Nozzle plain; large air ... 20 April 1932 ... Small, oval discus, with central filling hole; plain, concave.
... Nozzle plain; large air hole between wick hole and discus, with channel to the latter.
|
Part of bottom missing.
Plain rim, whirling rosette on discus; air hole at its edge nearest nozzle.
Solid grooved handle. Double concentric grooves on reverse.
Unglazed.
Light red clay.
Type XXVIII of ... 28 February 1936 ... Plain rim, whirling rosette on discus; air hole at its edge nearest nozzle.
|
| Intact.
Raised dots on rim, volutes either side of air hole. Plain discus; grooved solid handle. Raised dots on lower parts of sides; circular reverse with monogram "K".
Red clay and wash.
Type XXVIII ... 12 June 1936 ... Raised dots on rim, volutes either side of air hole. Plain discus; grooved solid handle. |
| Complete terracotta lamp but for lost at center of disk. Burning around wick-hole.
Disk: small, circular depressions within tear-shaped concave disk. Herringbone on rim. Air-hole preserved. Solid handle ... First half of fifth century AD ... Burning around wick-hole.
Disk: small, circular depressions within tear-shaped concave disk. Herringbone on rim. Air-hole preserved. |
Intact.
Herringbone rim; plain concave discus with ridges around filling hole, air hole; solid handle, double grooved above and below. Stamped semi-circles at either side of base of handle; circular reverse ... 6 April 1936 ... Herringbone rim; plain concave discus with ridges around filling hole, air hole; solid handle, double grooved above and below. |
Intact.
Horse-shoe-shaped rim, with herringbone pattern ending in debased scrolled leaves. Plain discus, with central filling hole and channel to nozzle; air hole on channel. Solid handle with three grooves ... 27 April 1936 ... Plain discus, with central filling hole and channel to nozzle; air hole on channel. |
Half of lamp preserved.
Rim plain, with herringbone panels.
On discus, rays, whirled; two raised lines round central filling hole.
Nozzle set off from rim by grooves; air hole in throat.
Handle solid, ... 5 August 1931 ... On discus, rays, whirled; two raised lines round central filling hole.
Nozzle set off from rim by grooves; air hole in throat.
|
On rim, leaf pattern.
Small, concave discus, with a ring of impressed circles round central filling hole. Handle, solid, double grooved. Nozzle, plain, rounded; large air hole on neck.
On reverse, double ... 22 July 1931 ... Small, concave discus, with a ring of impressed circles round central filling hole. Handle, solid, double grooved. Nozzle, plain, rounded; large air hole on neck.
|
Nozzle missing.
Plain panelled rim, with stamped circles, beside panels. Plain discus with boukranion above which a filling hole. Air hole between rim and discus. Grooved handle, triple above and below ... 12 February 1936 ... Plain discus with boukranion above which a filling hole. Air hole between rim and discus. |
Upper left part preserved.
Rim bordered with grooves, within which three stamped circles, on each side. Plain discus, filling hole in center.
Vertical grooved handle, unpierced. Air hole at base of neck ... 13 February 1936 ... Plain discus, filling hole in center.
Vertical grooved handle, unpierced. Air hole at base of neck.
|
Narrow rim, panelled by grooves.
On discus, a spotted beast sitting up, left, facing an urn in which he fishes with his left from paw. Underneath, two groove rings.
Air hole at base of nozzle, and a ... 3 April 1936 ... Underneath, two groove rings.
Air hole at base of nozzle, and a filling hole near base of grooved unpierced handle.
|
| Much of rim missing. A small open shallow dish on a high concial stand. Abundant traces of burning on floor of dish. At center of floor, a small irregular hole opens into inside of stand, an air-hole ... 18 April 1932 ... At center of floor, a small irregular hole opens into inside of stand, an air-hole.
|
On rim, leaf pattern.
Plain discus, rather deep, with central filling hole.
Nozzle set off by grooves, between which are impressed circles separated by groove leading to semi-pierced air hole.
Handle solid, ... 1 April 1932 ... Plain discus, rather deep, with central filling hole.
Nozzle set off by grooves, between which are impressed circles separated by groove leading to semi-pierced air hole.
... On bottom, hole in the middle. |
From badly worn mould.
Vine pattern on rim; rosette on discus. Air hole between rim and discus. Vertically grooved handle, unpierced. Double concentric grooves on bottom, within which an illegible device, ... 21 February 1936 ... Vine pattern on rim; rosette on discus. Air hole between rim and discus. |
Part of top only remains.
On discus, a dog to right, with head turned back.
Two filling holes and an air hole. Herringbone on rim.
Unglazed.
Buff clay.
Type XXVIII of Corinth collection. Byzantine Building, ... 9 March 1934 ... Two filling holes and an air hole. Herringbone on rim.
|
Air hole in shoulder; otherwise complete. Bottom rounded; body ribbed horizontally; flaring lip; widely projecting ridged handles.
On shoulder on one side, a dipinto in large red letters:
Roughly incised ... 26 May 1938 ... Air hole in shoulder; otherwise complete. |
Part of a series of lamps arranged in a row side by side. Fragment of lamp at left and only preserved, with top and part of sides.
Rectangular border of tiny parallel incisions around the circular, sharply ... 17 March 1938 ... Central filling hole, part of nozzle preserved at extreme left, with air hole behind. Room for about three nozzles in front of every lamp, but no signs of air hole for each. |
| On rim, herringbone.
On discus, double circular groove round eight-petalled rosette, nearly effaced; central filling hole.
Handle solid, triple grooved.
Nozzle, set off by double grooves; another groove ... 15 February 1932 ... On discus, double circular groove round eight-petalled rosette, nearly effaced; central filling hole.
Handle solid, triple grooved.
Nozzle, set off by double grooves; another groove from back of wick hole; air hole off center.
|
Part of one handle and fragments of body missing; minor fractures; large air hole in shoulder. Ring foot; rather fat egg-shaped body; narrow mouth and neck; small rolled rim; ridged handles from below ... 29 April 1939 ... Part of one handle and fragments of body missing; minor fractures; large air hole in shoulder. |
Intact.
Rim, horse-shoe-shaped, with herringbone pattern. Open channel between nozzle and discus. Discus pear-shaped; slightly concave, and plain. Filling hole, and one air hole. Solid handle with double ... 15 April 1936 ... Filling hole, and one air hole. |
| Handle chipped; otherwise intact.
Herringbone rim; small-petalled whirling rosette on discus. Handle triple grooved above; below, a single groove, with diagonal gouges at either side. Air hole at base ... 20 April 1936 ... Handle triple grooved above; below, a single groove, with diagonal gouges at either side. Air hole at base of nozzle and beside filling hole. |
On rim, herringbone.
On discus, rosette round filling hole, slightly off center.
Handle, solid, double grooved. On nozzle, circles with no air hole.
On reverse, double almond-shaped grooves, with five ... 22 July 1931 ... On discus, rosette round filling hole, slightly off center.
... On nozzle, circles with no air hole.
On reverse, double almond-shaped grooves, with five circles; within, criss-cross lines, much worn.
|
On rim, herringbone.
On discus, spotted collared dog left; filling hole above back between head turned back and tail turned forward.
Nozzle set off by transverse groove with air hole in middle.
Handle ... 31 March 1932 ... On discus, spotted collared dog left; filling hole above back between head turned back and tail turned forward.
Nozzle set off by transverse groove with air hole in middle.
|
| Top of handle broken away.
On rim, vine pattern; slopes upward toward center.
Discus extremely small; plain; with central filling hole.
Nozzle long; with channel to discus and air hole.
Handle pierced, ... 29 February 1932 ... Discus extremely small; plain; with central filling hole.
Nozzle long; with channel to discus and air hole.
|
On rim, vine pattern (?).
Discus, surrounded by moulded ring; central filling hole also surrounded by moulded ring; any other ornamentation effaced. Air hole behind nozzle.
Handle, perforated; triple groove ... 16 February 1932 ... Discus, surrounded by moulded ring; central filling hole also surrounded by moulded ring; any other ornamentation effaced. Air hole behind nozzle.
|
Part of top preserved.
Herringbone pattern on rim; nozzle separated from rim by horizontal line; three stamped circles at base of nozzle; grooves and ridges on discus, with large filling hole in center ... 11 March 1936 ... Herringbone pattern on rim; nozzle separated from rim by horizontal line; three stamped circles at base of nozzle; grooves and ridges on discus, with large filling hole in center.
Four small auxilliary filling holes on discus. Air hole on neck.
|
The handle broken off; and part of the raised edge. Chips missing.
Wreath in relief on top, surrounded by a high edge; suspension handle, attached either side of filling hole towards nozzle. Air hole at ... 4 March 1937 ... Wreath in relief on top, surrounded by a high edge; suspension handle, attached either side of filling hole towards nozzle. Air hole at back of top.
|
Broken all around.
Fragment from disc: bear walking left.
Body covered with small incisions. Part of air hole above.
Dull red-brown glaze.
Dark buff clay.
Similar to Agora VII, no. 901.
2nd. half of ... 29 July 1972 ... Part of air hole above.
Dull red-brown glaze.
|
| Intact.
Plain rim with herringbone panels. Boukranion on discus, with air hole above it. Solid handle with three grooves in front, two behind.
Circular reverse with double concentric grooves enclosing ... 21 May 1936 ... Boukranion on discus, with air hole above it. |
The end of the nozzle missing.
Fine ribs on discus; egg pattern on rim; double grooved handle, pierced. The top of the nozzle raised slightly above the rim. Air hole at base of nozzle.
Thin fabric, unglazed ... 27 January 1936 ... The top of the nozzle raised slightly above the rim. Air hole at base of nozzle.
|
| Top only preserved.
Herringbone on rim; raised crescent on discus, points toward the handle; air hole at junction of rim and discus. Solid grooved handle.
Thin red glaze.
Light red clay.
Type XXVIII of ... 29 February 1936 ... Herringbone on rim; raised crescent on discus, points toward the handle; air hole at junction of rim and discus. |
Full profile and most of top half preserved.
On disc, 15-petalled rosette; on rim, herringbone pattern. Double grooves on either side of nozzle. Central groove from air hole to wick hole. Grooved unpierced ... 21 June 1972 ... Central groove from air hole to wick hole. |
Handle broken.
On rim, row of circles or dots.
On discus, rosette round central filling hole; grooved petals. Handle, solid.
Nozzle, with no air hole, and with a shape more pointed.
On reverse, double ... 22 July 1931 ... On discus, rosette round central filling hole; grooved petals. ... Nozzle, with no air hole, and with a shape more pointed.
|
On rim, herringbone, nearly effaced.
On discus, nothing distinguishable but filling hole off center in uneven surface.
Nozzle, set off by grooves; air hole behind.
Handle solid; double groove above, single ... 21 March 1932 ... On discus, nothing distinguishable but filling hole off center in uneven surface.
Nozzle, set off by grooves; air hole behind.
Handle solid; double groove above, single below; set off from body by grooves; impressed circles at base.
|
On rim, herringbone.
Discus plain, with central filling hole.
Nozzle set off by double groove; air hole behind.
Handle solid, double grooved; set off from body by grooves.
On bottom, almond-shaped groove ... 6 April 1932 ... Discus plain, with central filling hole.
Nozzle set off by double groove; air hole behind.
|
Part of rim and handle missing; otherwise intact.
Mold for top; double row of raised dots on rim; rays on discus; central filling hole, triangle of dots around air hole on discus.
Buff slip inside and ... 13 May 1938 ... Mold for top; double row of raised dots on rim; rays on discus; central filling hole, triangle of dots around air hole on discus.
|
On rim, herringbone.
On discus, whirling rosette.
Handle solid, double grooved.
Nozzle set off from rim by two diagonal lines; no air hole.
On bottom, double almond-shaped grooves, enclosing palm branch ... 22 April 1932 ... Nozzle set off from rim by two diagonal lines; no air hole.
On bottom, double almond-shaped grooves, enclosing palm branch.
|
Nozzle missing.
Wavy lines on rim, plain concave discus. Grooved handle, solid; row of short incised lines at base of nozzle, on rim, behind which an air hole.
Bottom has double circular grooves within ... 29 February 1936 ... Grooved handle, solid; row of short incised lines at base of nozzle, on rim, behind which an air hole.
Bottom has double circular grooves within which a palm branch with stamped circles on either side.
|
| Intact.
Vine pattern on rim; rosette on discus; grooved handle; air hole at base of neck. Double concentric grooves on bottom within which "K Y".
Purple-red glaze wash.
Red clay and light glaze.
Type ... 29 February 1936 ... Vine pattern on rim; rosette on discus; grooved handle; air hole at base of neck. |
Top only preserved.
Rim has a band of small raised dots. Stamped hearts either side of air hole at base of nozzle. Small concave discus with moulded profile. Solid grooved handle.
Light red clay and glaze ... 28 February 1936 ... Stamped hearts either side of air hole at base of nozzle. |
Vertical handle and end of nozzle missing.
Volutes at base of nozzle, and an air hole. Plain discus. Flaring lug handless at the sides. Flat bottom outlined by a single groove.
Thin brownish glaze, much ... 23 March 1936 ... Volutes at base of nozzle, and an air hole. Plain discus. |
Intact except for nozzle.
Raised dots on rim, raised semi-circles either side of air hole. Plain discus, solid grooved handle. Circular reverse with double concentric grooves enclosing letter "K".
Worn ... 9 June 1936 ... Raised dots on rim, raised semi-circles either side of air hole. Plain discus, solid grooved handle. |
On rim, leaf pattern.
Small, plain discus, concave, with central filling hole.
Nozzle, plain, with groove from wick hole to air hole at edge of discus.
Handle solid, hatched band above, triple grooved ... 12 April 1932 ... Small, plain discus, concave, with central filling hole.
Nozzle, plain, with groove from wick hole to air hole at edge of discus.
|
| Intact save for small chips.
Wavy lines on rim; rosette on discus. Solid handle, triple grooved above and below. Air hole at base of nozzle. Two concave grooves, small, on reverse.
Thin purplish-red glaze ... 20 April 1936 ... Solid handle, triple grooved above and below. Air hole at base of nozzle. |
Handle broken away.
On rim, herringbone (?), nearly effaced.
On discus, rosette.
Double (?) nozzle groove at sides; no air hole.
On bottom, double circular groove with double grooves towards nozzle, and ... 29 January 1932 ... nozzle groove at sides; no air hole.
On bottom, double circular groove with double grooves towards nozzle, and curved grooves joining toward handle.
|
A single fragment preserves part of discus, rim and nozzle.
Discus plain, round. On rim, impressed oblique leaf pattern, with impressed circles and air hole at nozzle. Nozzle, rounded.
No glaze.
Light ... 31 May 1938 ... On rim, impressed oblique leaf pattern, with impressed circles and air hole at nozzle. |
| Intact.
Raised dots on rim, raised semi-circle either side of air hole. Plain discus, solid grooved handle. Raised dots on bottom of sides. Circular reverse with a letter "K" in it.
Red clay and wash ... 9 June 1936 ... Raised dots on rim, raised semi-circle either side of air hole. Plain discus, solid grooved handle. |
| Complete. Burnt at nozzle.
Concave disk, plain, with three asymmetrical holes around central air hole; framing band. Herringbone on rim. Sides of nozzle grooved with additional hole behind nozzle. Solid ... First half of 5th c. A.D ... Concave disk, plain, with three asymmetrical holes around central air hole; framing band. ... Sides of nozzle grooved with additional hole behind nozzle. |
Discus and rim fragment.
On discus, gladiator striding right, trident fork-down in raised right hand; chlamys (?) over left forearm and some undetermined object over left hand. Perhaps some representation ... 20 February 1932 ... Filling hole left.
Nozzle set off by single grooves; air hole.
|
| Intact.
Grapevine pattern on rim; rosette on discus; palm branch, within double groove, on bottom. Air hole at base of nozzle. Solid handle, triple grooved above; double below; leaf motifs at bottom.
Purplish-red ... 20 April 1936 ... Grapevine pattern on rim; rosette on discus; palm branch, within double groove, on bottom. Air hole at base of nozzle. |
| Intact.
Stamped circles on rim; two grooves at inner edge. Rosette on discus. Solid handle, triple grooved above, double below.
Underneath, palm branch inside leaf-shaped groove. Air hole at base of nozzle ... 20 April 1936 ... Underneath, palm branch inside leaf-shaped groove. Air hole at base of nozzle.
|
Handle broken.
On rim, herringbone.
Discus, plain, sharply concave; four oil holes.
On nozzle, on either side of the air hole and channel, are two grooves at an obtuse angle, terminating the herringbone ... 23 July 1931 ... On nozzle, on either side of the air hole and channel, are two grooves at an obtuse angle, terminating the herringbone pattern of the rim.
|
On rim, herringbone.
On discus, lion seated right. Filling holes behind back and under forelegs.
Nozzle, set off by double grooves with large air hole between.
Handle solid, double grooved.
On reverse, ... 5 February 1932 ... Nozzle, set off by double grooves with large air hole between.
|
Most of top preserved; nozzle missing.
Herringbone pattern on rim, plain discus, with three small filling holes around central larger one. Air hole at base of neck. Vertical grooved handle, semi-pierced ... 13 February 1936 ... Herringbone pattern on rim, plain discus, with three small filling holes around central larger one. Air hole at base of neck. |
Part of top preserved, with vertical ribbed and pierced handle in center of discus, for suspension. Concentric grooves on rim. Two filling holes on discus, beside handle; air hole between discus and rim ... 13 February 1936 ... Two filling holes on discus, beside handle; air hole between discus and rim.
|
Only top preseved.
Herringbone on rim; rosette on discus, with pointed petals, and between each one stamped circles. The circle nearest the nozzle is punched through and becomes the air hole.
Thin red ... 28 February 1936 ... The circle nearest the nozzle is punched through and becomes the air hole.
Thin red glaze, burned black and dark gray.
|
End of nozzle missing.
Herringbone on rim; whirling rosette on discus. Four small holes punched in the rosette, but not pierced through. Stamped circle at each side of nozzle, and air hole. Handle pierced ... 7 March 1936 ... Stamped circle at each side of nozzle, and air hole. Handle pierced and grooved.
|
Intact.
Plain discus. Herringbone on rim. Solid, grooved handle.
On the back, within grooves, an incised cross.
Red clay, unglazed.
Type XXVIII of Corinth collection.
Cf. Corinth IV, ii, pp. 102-114, ... 400-450 A.D ... ADDENDA: Tear-shaped discus with an air hole. Sloping rim. |
Top only preserved.
Rim plain except for three panels with herringbone designs; a stamped circle on either side of each panel, and of the nozzle. Doubly grooved pierced handle, two filling holes, an air ... 17 March 1936 ... Doubly grooved pierced handle, two filling holes, an air hole at base of nozzle.
|
Intact.
Herringbone pattern on rim; Christian cross on discus; three filling holes and one air hole. Solid handle with single groove on front. Almond-shaped reverse with double grooves and stamped circles ... 14 May 1937 ... Herringbone pattern on rim; Christian cross on discus; three filling holes and one air hole. Solid handle with single groove on front. |
Chips missing from toe and lip, otherwise complete. Air hole broken through shoulder. Tubular toe, pointed body, high wheel ridged neck. High lip offset by flange at bottom. Heavy ridged handles.
Coarse ... 9 July 1975 ... Chips missing from toe and lip, otherwise complete. Air hole broken through shoulder. |
On rim, herringbone.
Discus plain, with filling hole slightly off center; air hole edge next nozzle.
Nozzle set off by grooves; impressed circles between.
Handle solid, double grooved; set off from body ... 6 April 1932 ... Discus plain, with filling hole slightly off center; air hole edge next nozzle.
|
Intact.
Body rather watch-shaped. Rim has grape vine pattern evidently from an old worn mould. Plain circular discus, separated by two grooves from rim; central filling hole and three subsidiary ones on ... 10 February 1936 ... Plain circular discus, separated by two grooves from rim; central filling hole and three subsidiary ones on discus; air hole on neck. |
Small hole in bottom; handle chipped.
Plain concave discus, set off from down sloping rim by two light grooves; air hole.
Impressed petals on rim. Small rounded nozzle. Thin high-pierced handle; two grooves ... 29 March 1939 ... Small hole in bottom; handle chipped.
Plain concave discus, set off from down sloping rim by two light grooves; air hole.
Impressed petals on rim. |
Tip of handle missing.
On rim, stamped triangles and leaves.
On discus, Christian monogram with loop to right; herringbone pattern on arms of cross; three oil holes.
Handle plain, solid. Rather long nozzle ... 13 July 1931 ... Rather long nozzle rounded; channel of neck with air hole.
On reverse, double almond-shaped groove, with palm branch.
|
On rim, herringbone.
On discus, rosette. Handle, solid, double grooved. Nozzle with single groove at side, but with no air hole.
On reverse, double almond-shaped groove with stamped circles between the ... 22 July 1931 ... Nozzle with single groove at side, but with no air hole.
On reverse, double almond-shaped groove with stamped circles between the lines; within a palm branch.
|
Intact.
Herringbone pattern on rim; rosette with pointed petals on discus. Two stamped circles at base of nozzle, one punched through for air hole. Handle triply grooved above and below; almond-shaped ... 12 March 1936 ... Two stamped circles at base of nozzle, one punched through for air hole. Handle triply grooved above and below; almond-shaped reverse, with double grooves and stamped circles.
|
| On rim, circular band of herringbone pattern between ridges.
Nozzles, one at either end of the lamp, with rudimentary volute decoration, enclosing three raised dots on either side of an air hole; half ... 12 August 1931 ... Nozzles, one at either end of the lamp, with rudimentary volute decoration, enclosing three raised dots on either side of an air hole; half of the top of one nozzle missing.
Central handle, rising from a plain discus, with an oil hole on either side; triple grooved; pierced
On reverse, double circular grooves.
|
On rim, herringbone pattern.
Small, plain discus, concave, with central filling hole; two large circles at base of handle, balanced by two more on either side of air hole at back of nozzle.
Handle solid, ... 22 April 1932 ... Small, plain discus, concave, with central filling hole; two large circles at base of handle, balanced by two more on either side of air hole at back of nozzle.
|
On rim, herringbone, with two stamped circles at nozzle.
Discus, plain, with circular groove surrounding it; one central and four auxiliary oil holes. Air hole in the circular groove, between nozzle and ... 23 February 1932 ... Discus, plain, with circular groove surrounding it; one central and four auxiliary oil holes. Air hole in the circular groove, between nozzle and discus.
Nozzle rounded, with large wick hole.
Handle solid, triple grooved above, double below.
|
Intact.
Herringbone on rim. On discus, bust of Mithras (?), very crude, left, holding an axe in right hand. The bust rests on a line of small stamped rectangles.
Filling hole at right of head, air hole ... 7 March 1936 ... Filling hole at right of head, air hole at junction of discus and nozzle. |
On rim, herringbone.
On discus, collared, spotted dog, down on forelegs. Head turned back and tail curled forward. Filling hole between. Spots intaglio. Narrow band with rope pattern, short hatching, under ... 20 February 1932 ... Filling hole between. Spots intaglio. ... Short groove from air hole to large wick hole with impressed undotted circle on either side.
|
Back part of lamp and end of handle broken away.
Rim, plain at sides; double concentric semi-circles on either side of channel from discus to wick hole; at back, below handle, remains of vine pattern (?) ... 24 February 1932 ... Rim, plain at sides; double concentric semi-circles on either side of channel from discus to wick hole; at back, below handle, remains of vine pattern (?).
Discus, plain, sharply concave, with central filling hole.
Very long nozzle, with channel set off by ridges from rim; air hole in channel.
|
Rim, with additional small circles close to the herringbone on either side.
On discus, straight rays, with small central filling hole.
Nozzle with large wick hole and channel from air hole.
Handle solid, ... 13 February 1932 ... On discus, straight rays, with small central filling hole.
Nozzle with large wick hole and channel from air hole.
|
|
|
